48 lines
1.7 KiB
Markdown
48 lines
1.7 KiB
Markdown
# <img alt="OpenSK logo" src="../img/OpenSK.svg" width="200px">
|
|
|
|
## Nordic nRF52840 MDK
|
|
|
|
Makerdiary has instructions on their [website](https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/opensk/). They use a custom script to deploy via DFU.
|
|
|
|
After general setup, you still need these steps:
|
|
|
|
1. Create the hexfile with the firmware.
|
|
|
|
```shell
|
|
./deploy.py --board=nrf52840_mdk_dfu --opensk --programmer=none
|
|
```
|
|
|
|
1. Download the
|
|
[script](https://github.com/makerdiary/nrf52840-mdk-usb-dongle/blob/master/tools/uf2conv.py)
|
|
from Makerdiary's GitHub into the OpenSK repository.
|
|
|
|
1. Run the script:
|
|
|
|
```shell
|
|
py_virtual_env/bin/python3 uf2conv.py -c -f 0xada52840 -o target/opensk.uf2 target/nrf52840_mdk_dfu_merged.hex
|
|
```
|
|
|
|
1. Boot into DFU mode. Keep the user button pressed on your hardware while
|
|
inserting it into a USB slot. You should see a bit of red blinking, and then
|
|
a constant green light.
|
|
|
|
1. Your dongle should appear in your normal file browser like other USB sticks.
|
|
Copy the file `target/opensk.uf2` over.
|
|
|
|
1. Replug to reboot.
|
|
|
|
### Buttons and LEDs
|
|
|
|
The big, white button conveys user presence to the application. Some actions
|
|
like register and login will make the device blink, asking you to confirm the
|
|
transaction with a button press.
|
|
|
|
The LED shows the state of the app. There are different patterns:
|
|
|
|
| Pattern | Cause |
|
|
|------------------------------------|------------------------|
|
|
| red glow | busy |
|
|
| red and blue blinking | asking for touch |
|
|
| red, green, white pattern for 5s | wink (just saying Hi!) |
|
|
| constant green | DFU mode |
|